Your material comparison
Company:
Chosen norm:
|
1% Elongation after 1000h creep test ISO 899-1 |
Flexural Strength ISO 178 dry 125 °C |
Flexural Strength ISO 178 dry 175 °C |
Flexural strength ISO 178 dry 23 °C |
Bending Modulus ISO 178 |
Elongation at break ISO 527 23°C |
Elongation at break ISO 527 dry 23°C |
Elongation at break ISO 527 moist |
Tensile strength old ISO 527 dry |
Flexural modulus ISO 178 dry 23°C |
Izod Notched Impact Strength ISO 180/1epA -30°C |
Izod Notched Impact Strength ISO 180/1epA 23°C |
Ball Hardness ISO 2039-1 |
Rockwell Hardness ISO 2039-2 dry 23 °C |
Shore D hardness ISO 868 |
Yield ISO 527 |
Yield stress ISO 527 23°C |
Tensile strength ISO 527 dry 23 °C |
Tensile strength DIN ISO 527 moist |
Tensile strength ISO 527 23 °C |
Tensile - (Specimen Type 1-B) Test Speed |
Charpy notched impact strength ISO 179 |
Charpy impact strength ISO 179 |
Tensile E-Modulus ISO 527 |
Flexural Strength ISO 178 |
Flexural modulus (E) ISO 178 |
Flammability classification* ISO 1210 |
Flammability, Oxygen Index ISO 4589 |
Fire Behavior DIN 4102 |
Flammability certification EN 13501 |
Flammability classification* UL 94 |
Flammability certification EN 13501-1 |
Fire Behavior EN 13501 |
Flammability Ö-NORM B 3800 |
Glow wire ignition temperature EN 60695-2 (GWIT) |
Tracking - DIN 53480 Phase KB |
Food contact - |
Transmittance of 3mm thickness DIN 5036T3 |
Fastness to light blue scale EN 438/2-16 |
Lightfastness EN 438/2-16 |
Fastness to light gray scale EN 438/2-16 |
Water Absorption DIN 53495 moist 23°C |
Water Absorption DIN 53715 23°C, 50% humidity |
Water Absorption ISO 1110 23°C, 50% humidity |
Water Absorption ISO 62 23°C, saturation |
Water Absorption ISO 62 moist 24h storing in water, 23°C |
Water Absorption ISO 62 moist 96h storing in water, 23°C |
Thickness EN 438-2.5 |
Flatness EN 438-2.9 |
Resistance to abrasion EN 438-2.11 |
Resistance to immersion in boiling water EN 438-2.12 |
Resistance to water vapour EN 438-2.14 |
Resistance to wet conditions EN 438-2.15 |
Resistance to impacy by large diamater ball EN 438-2.21 |
Resistance to staining EN 438-2.26 |
Resistance to artificial weathering (incl. light fastness) EN 438-2.29 |
Density ISO 1183 |
Brand bay DIN 4102-1 |
Density DIN |
Continuous operating temperature - lower temperature limit |
Continuous operating temperature DIN 53446 20.000h |
Continuous operating temperature DIN 53446 5.000h |
Maximum Service Temperature for Few Hours Operation - |
Service temperature short time DIN 53446 |
Melting Temperature DIN 53736 |
Melting Temperature ISO 3146 |
Coefficient of thermal expansion DIN 53752 |
Vicat A/120 ISO 306 10N / 120 K/h |
Vicat A/50 ISO 306 10N / 50K/h |
Vicat B/120 ISO 306 50N / 120K/h |
Vicat B/50 ISO 306 50N / 50K/h |
Heat Resistance - HDT-A (1,80 Mpa) DIN 53461 |
Heat Resistance - HDT-A (1,80 Mpa) ISO 75-2 |
Thermal Conductivity - dry Method A |
Thermal Conductivity DIN 52612 |
Operating temperature range - long term (months) |
Dissipation Factor DIN 53483 |
Dissipation Factor Tan δ IEC 60250 1E2 HZ |
Dissipation Factor Tan δ IEC 60250 1E6 HZ |
Permittivity DIN 53483 of 1 MHz |
Permittivity IEC 60250 of 1 MHz |
Dielectric Strength DIN 53481 |
Dielectric Strength IEC 60243 |
Tracking DIN 53480 phase KC |
Resistivity DIN 53482 |
Resistivity IEC 60093 |
Surface Resistivity DIN 53483 |
Surface Resistivity IEC 60167 |
Comparative Tracking Index Number IEC 60112 |
Compressive Strength EN 826 |
Compressive Strength DIN 53454 |
Flexural Strength EN 12089 |
Gamma Radiation - Radiation index RI |
Hot water / steam - |
Maintains a saturated atmosphere with SO2 - |
Concentrated Alkalis - |
Diluted Alkalis - |
Concentrated Acids - |
Diluted Acids - |
UV stabilization - |
Water vapor diffusion resistance factor DIN 52615 |
Density EN 1602 |
Density DIN 53 479 23°C |
Density ISO 1183-1 23°C |